Table of Contents
Advertisement
Pager Call
This feature allows you to alert your pager when the unit records an
incoming message. You can retrieve the message from a touch tone
telephone (p. 36). First store the pager number, then turn on the pager
call mode.
l
The TALK and DIGITAL SP-PHONE indicator lights must be off
before programming.
Storing the Pager Number
1
2
3
4
9
Press
(PROGRAM/2WAY
REC).
eThe TALK indicator flashes.
Press
(SCREEN/PLAYBACK | ) .
eThe indicator lights.
e"P" is displayed on the base unit.
Press (8).
a) Enter your pager number and
then press
twice.* (Enter the access code,
if required by your pager
company.)
b) Enter the call back number to
be displayed on the pager.
(Press (a), if required by your
pager company.)
elf you misdial, press
PROGRAM/2WAY REC) then start
from step 1.
eYou can enter a total of 48 digits.
PROGRAM/2WAY REC
When finished, press
SCREEN/PLAYBACK
eThe indicator lights go out.
"Your pager company requires a delay after the pager number is dialed.
Contact your pager company regarding the required pause time.
Pressing
once creates a 3.5 second delay and counts
as one digit.
Advertisement
Table of Contents
