Handset Battery Replacement; Backup Battery Replacement - Panasonic KX-TG2000B Operating Instructions Manual

Handset Battery Replacement

If "Recharge" is displayed and/or "
replace the battery with a new Panasonic HHR-P506 (PQHHR150AA21)
battery. To order, call the accessories telephone number on page 3.
1
Remove the cover by sliding
while pressing the arrow.
2
Replace the battery, and close
the cover.
3
Be sure to charge the new battery
for about 8 hours in order to display
the battery strength prompt correctly
(p. 17).
• After replacing the battery or re-connecting the battery plug, be sure to place the
handset on the charger until a confirmation tone sounds or the battery strength
prompt displays (p. 17).
• The handset battery is a Nickel-Metal Hydride battery. You cannot recycle this
battery.

Backup Battery Replacement

Even if the backup battery has been fully charged, the BATTERY indicator
may flash or the unit may not work within minutes after a power failure. In
that case, replace the battery with a new Panasonic P-P507 (PQP50AA61)
battery. To order, call the accessories telephone number on page 3.
Disconnect the telephone line cord(s), and open the battery cover by
pushing down the tab. Replace the battery, close the battery cover and
reconnect the telephone line cord(s).
Attention:
The product you have purchased is powered by a nickel cadmium
battery which is recyclable. At the end of its useful life, under
various state and local laws, it is illegal to dispose of this
battery into your municipal waste stream. Please call
1-800-8-BATTERY for information on how to recycle this battery.
90
" flashes after being fully charged,
H