Av In Terminal Connection; Digital Link Terminal Connection - Panasonic SF2H Series Operating Instructions Manual

AV IN terminal connection

Note
●
Video equipment and connection cables are not
supplied with this unit.
4-pole mini plug conversion cable (supplied)
Audio video pin cable (commercially available)
Video Cassette Recorder
DVD Player
Wiring specifications for 4-pole mini plug
Note
●
Use a 4-pole mini plug (M3) (supplied) with the
following wiring specifications for the AV IN terminal of
this unit. If the wiring of a plug is different, audio and
video are not correctly input.
Audio L (White)
Audio R (Red)
GND (Ground)
Video (Yellow)
22
English
Yellow
White
Red
4 3 2 1

DIGITAL LINK terminal connection

Twisted pair cable transmitters such as the Panasonic
Digital Interface Box (ET-YFB100G) or the DIGITAL
LINK Switcher (ET-YFB200G) use twisted pair cables
to transmit inputted video and audio signals, and
these digital signals can be input to the Display via the
DIGITAL LINK terminal.
DIGITAL LINK
PC to control the unit
Example: Panasonic ET-YFB100G
PC
Video Cassette Recorder
DVD Player
Note
● Video equipment and connection cables are not
supplied with this unit.
● When connecting with DIGITAL LINK, be sure to
configure each of the [Network settings] settings. (see
page 60)
For the cautions for DIGITAL LINK setting and
connection, refer to "DIGITAL LINK Terminal
connection" and "Precautions for use while
connecting with a twisted pair cable transmitter". (see
page 79)
Analogue signal is output as
Digital signal.