Panasonic SF2H Series Operating Instructions Manual page 73

Full hd lcd display for business use
Table of Contents

Advertisement

Onscreen display
Set to display / hide the following Onscreen display.
Power on display
Input signal switch display
No signal display
No external media display (at USB input)
MUTE display after displaying the menu screen
Off timer remaining time display when 3 minutes
remaining
Display when responding to commands from external
control
[On]:
Displays the Onscreen display.
[Off]:
Hides the Onscreen display.
Initial input
Adjusts the input signal when the unit is turned on.
[Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK] /
[DVI-D] / [PC] / [VIDEO] / [USB] / [MEMORY
VIEWER]
Note
This menu is available only when [Input lock] is [Off].
(see page 73)
Initial VOL function
Enables/Disables [Initial VOL function] when the unit is
turned on.
[Off]:
It will be the sound volume level which had been
set before the power of the unit was turned off.
[On]:
It will be the sound volume level set for [Initial VOL
level].
Initial VOL level
Sets the sound volume when [Initial VOL function] is
enabled.
Note
Outputs with the set volume when [Initial VOL
function] is [On].
When [Maximum VOL function] is [On], the volume
cannot be set to the level higher than the level set for
[Maximum VOL level].
Maximum VOL function
Enables/Disables [Maximum VOL function].
[Off]:
The sound volume level can be set up to 100
(maximum).
[On]:
The volume cannot be set to the level higher than
the level set for [Maximum VOL level].
Maximum VOL level
Sets the sound volume when [Maximum VOL function]
is enabled.
Note
Outputs with the set volume when [Maximum VOL
level] in [On] state is selected on the menu.
When the [Maximum VOL function] is switched from
[Off] to [On], if the [Maximum VOL level] is set lower
than the [Initial VOL level], the [Initial VOL level]
automatically becomes the same as the [Maximum
VOL level].
Input lock
Disables [Input] operation by locking the input.
[Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK] / [DVI-D]
/ [PC] / [VIDEO] / [USB] / [MEMORY VIEWER]
Note
Input switch can be used when this is set to [Off].
73
English

Advertisement

Table of Contents
loading

Table of Contents