Table of Contents
Advertisement
■
[Signal range]
This menu is displayed at HDMI1, HDMI2, DIGITAL
LINK and DVI-D IN inputs. Switches the dynamic
range to match the signals from the source connected
to each terminal.
[Video(16-235)]:
If the input signal is the video range
Example: HDMI terminal output for DVD player
[Full(0-255)]:
If the input signal is full range
Example: HDMI terminal output for personal
computer
[Auto]:
Switches the dynamic range automatically between
[Video(16-235)] and [Full(0-255)] according to the
input signal.
Note
●
[Auto] can be selected when HDMI or DIGITAL
LINK signal is input.
■
[Input level]
This menu is displayed at PC IN and AV IN inputs.
Adjustment of parts which are extremely bright and
hard to see.
-16 to +16:
(Level low) ‒ (Level high)
■
[3D Y/C filter]
Set this if the video looks unnatural at AV IN input. Set
this to [On] normally.
Note
●
Depending on the signalling system, this setting
may be less effective or may not be effective at all.
■
[Colour system]
Sets the colour system according to the signal
method at AV IN input. Set this to [Auto] normally.
This automatically detects the input signal format.
[Auto], [PAL], [SECAM], [NTSC], [NTSC4.43],
[PAL-M], [PAL-N]:
Set this to [Auto] when viewing PAL-60 videos.
When images are unstable
When the system is set to [Auto], images become
unstable in rare case under the condition that the
input signals are at low level or have many noises.
In this case, set the system so it conforms with the
input signal format.
■
[Dynamic backlight control]
Improves picture contrast and alleviates whiteness
by controlling the back light when signals with the low
average brightness level (APL) are input.
[On]:
Enables the [Dynamic backlight control] function.
[Off]:
Disables the [Dynamic backlight control] function.
Note
●
When [Setup] - [LightID] is set to [External control]
or [Internal ID], the setting of this function is fixed to
[Off].
●
The screen may become dark if menu operation or
input signal switching is performed while the on-
screen menu is being displayed with this function set
to [On]. Hiding the on-screen menu will restore the
screen to the appropriate brightness.
●
If the [Dynamic backlight control] setting is different
for each input, the screen brightness may change by
switching input.
●
Depending on the displayed image, the screen may
flicker. If this annoys you, set [Dynamic backlight
control] to [Off].
■
Input signal display
Displays the frequency and the type of the current
input signal.
H-freq.
33.72
60.00
V-freq.
Dot clock freq.
74.18 MHz
Signal format
1080/60i
Display range:
Horizontal (15 kHz ‒ 135 kHz)
Vertical (24 Hz ‒ 120 Hz)
The dot clock frequency is displayed when Digital and
PC signal are input.
kHz
Hz
English
49
Advertisement
Table of Contents
