Operating With Web Browser - Panasonic SF2H Series Operating Instructions Manual

Operating with Web Browser

■
WARNING display page
The following warning page is displayed when you log in
with the factory default user name and password. Click
the [Continue] button to display the [Display Control
Window] page.
Note
●
It is recommended to change password on the
[Change password] page.
● Depending on the browser, displayed operations may
change.
■
Description of each section
Page tab
Click these to switch pages.
[Status]
Click this item, and the status of the Display is
displayed.
[Display control]
Click this item to display the Display control page.
[Detailed set up]
Click this item to display the advanced settings
page.
[Change password]
[Crestron Connected™]
Click this item to display the Crestron Connected™
operation page.
[Browser Remote Control]
Click this item to display the Browser Remote
Control on the WEB browser, which is the same as
the supplied remote control.
88
English
Display status page
Click [Status] → [Display status].
This page displays the Display statuses established for
the items shown below.
Displays the type of Display.
Displays the firmware version of the display.
Network status page
Click [Status] → [Network Status].
Displays the current configuration information of the
network.
Displays the configuration details of wired LAN.
■
Input information page
Displays the input information of this unit.
Click [Status] → [Input status].
Displays the information of the input terminal.
Displays the information of the input signal.
Note
●
If an input is other than USB input, the name of the
input signal is displayed.
●
In the case of USB input, the name of the file being
played is displayed.
●
[----] is displayed in standby mode.