Memory Viewer Settings - Panasonic SF2H Series Operating Instructions Manual

Full hd lcd display for business use

Table of Contents

■

[Resume play]

Set resume play off/on.

■

[Playlist edit]

Creates / Edits the scenario file (scenario.dat).

For details of [Playlist edit], refer to "Playlist edit

function" (see page 103).

■

[Scenario file check]

Execute the contents check of the USB memory which is

connected to the USB terminal. If any error is detected,

the error code and file name will be displayed.

For details of the error codes, refer to "USB memory

contents check". (see page 101)

Select [Scenario file check] with

<ENTER>.

Scenario file check

Available

Note

●

When the schedule playback is proceeding using

"Content Management Software", [Scenario file

check] is disabled.

■

[Codec information]

Displays the codec information of a motion picture/still

picture file being played on the USB media player.

The file is analysed on execution, and the codec

information is displayed after the completion of the

analysis.

Note

●

The file analysis takes time in proportion to the

number of files in the USB memory device.

●

A black screen appears during analysis because

playback is stopped.

●

Incompatible with the schedule play mode.

■

[Slide show duration]

Select the displaying duration for still images.

[10 sec] to [600 sec]

Note

●

When the schedule playback is proceeding using

"Content Management Software", [Slide show

duration] is disabled.

English

■

Play mode

Specifies the playback mode operating with [Schedule

play function]. To apply this setting to the schedule

playback operation, restart this unit.

Also, if the playback mode is specified for the schedule

data of "Content Management Software" during the

schedule playback, it takes priority.

[Individual play]:

Plays in the individual playback mode.

Content is played only on one display.

[Synchronize play]:

Plays in the synchronized playback mode.

Content is played on multiple displays in

and press

synchronization.

Note approx. 5 seconds of preparation time are

added in switching content to synchronize the

playback timing.

Note

●

The synchronized playback operates properly only

when [Date and time] - [Synchronize display] is set to

[On] and the time is synchronized.

●

[Current setting] shows [Play mode] when the

schedule playback is performed by this unit.