Table of Contents
Advertisement
Using "USB media
player"
Function description
The USB media player displays still pictures and motion
pictures saved in a USB memory by inserting the USB
memory device into the display.
Note
●
To use this function, set [USB media player] to
[Enable] in [Setup] - [USB media player settings]. (see
page 63)
●
When using the "Single Media Player", the unit
prevents a black screen from appearing at the
switching timing of still pictures or motion pictures.
Note the following restrictions.
(1) A black screen may appear when switching a
motion picture codec.
(2) A black screen may appear or images may be
disturbed when switching to motion pictures of a
different frame rate or aspect ratio.
If an angle of view for something other than for
16:9 is used, images may be disturbed near the
end of playback.
Inserting a black screen (approx. 2 sec.) at the
switching timing for all the motion pictures can avoid
image disturbance in above (2).
([USB media player settings] (see page 63))
●
Using the content list delivery function of the Multi
Monitoring & Control Software (see page 85), content
(still/motion pictures) played back on a USB media
player and the playback list can be delivered.
(Still pictures that can be delivered are only jpg files.)
For details, refer to the manual of Multi Monitoring &
Control Software.
Single Media Player
Files are played by a single unit.
Multi Media Player
Connecting more than one unit using LAN cables plays
back files in the USB memory simultaneously.
One of the multiple units becomes the parent, and the
others are children. The two-unit configuration example
is shown below.
For LAN connection, see "Network environment (Multi
Media Player only)" (see page 102).
96
English
USB memory
Note
●
For Multi Media Player, one USB memory device is
required for one unit.
●
For Multi Media Player, the parent requires both
"scenario.dat" and "filelist.dat", and the child requires
"filelist.dat" only.
●
Describe "GroupID:G01" without changing characters
other than numbers (2-digit description required).
Without description, the Multi Media Player does not
function.
●
When motion pictures are played on the multi media
player, a black screen may be displayed for a certain
period of time at the switching timing of motion
pictures.
●
If this unit is adjacently installed when using the
LightID function, the reception sensitivity of LightID on
a smartphone, etc. may be degraded.
USB
memory
Parent
Child
Hub or broadband router
USB memory
Advertisement
Table of Contents
