HIKVISION DS-2DF7C445IXR-AEL(T5) User Manual page 25

Click and to draw the distance on live image, or input values in the text fields of Min. Pupil
Distance and Max. Pupil Distance.
6. Click Save.
7. Set arming schedule. See Set Arming Schedule .
8. Set linkage method. See Linkage Method Settings .
Expert Mode Settings
Steps
1. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action
during configuration.
Normally, the PTZ control is automatically locked when you enter the configuration interface.
You can manually resume the lock when the countdown is over.
2. Input Mounting Height of the device.
3. Set detection scenes and detection areas.
1) Select a detection scene.
2) Adjust the live image to a desired scene. You can use PTZ control buttons or click
scene with a face.
3) Click , and draw a detection area on live image.
4) Input or draw the min. pupil distance and the max. pupil distance.
The Min. Pupil Distance and the Max. Pupil Distance are used to improve detection accuracy.
Only targets whose pupil distance are between the maximum distance and the minimum
distance trigger the capture.
Click and
Pupil Distance and Max. Pupil Distance.
5) Click Save.
6) Repeat above steps to set other detection scenes and areas.
4. Set patrol schedule.
1) Click Patrol Schedule.
2) Draw time bars as desired.
3) Click a time bar and click Configuration.
4) Edit patrol path and input dwell time for each detection scene.
5) Click Save.
5. Set linkage method. See Linkage Method Settings .
Network Speed Dome User Manual
to draw the distance on live image, or input values in the text fields of Min.
Add a detection scene to the patrol path.
Adjust the order of the scenes.
Delete the detection scene.
13
to locate a