Video Recording; Record Automatically - HIKVISION DS-2DF7C445IXR-AEL(T5) User Manual

Picture Storage
Pool ID
4. Click Test to test the configured settings.
5. Click Save.

7.2 Video Recording

This part introduces the operations of manual and scheduled recording, playback, and
downloading recorded files.

7.2.1 Record Automatically

This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and
Alarm for details.
Steps
1. Go to Configuration → Storage → Schedule Settings → Record Schedule .
2. Check Enable.
3. Select a record type.
Note
The record type is vary according to different models.
Continuous
The video will be recorded continuously according to the schedule.
Motion
When motion detection is enabled and trigger recording is selected as linkage method, object
movement is recorded.
Alarm
When alarm input is enabled and trigger recording is selected as linkage method, the video is
recorded after receiving alarm signal from external alarm input device.
Motion | Alarm
Video is recorded when motion is detected or alarm signal is received from the external
alarm input device.
Motion & Alarm
Video is recorded only when motion is detected and alarm signal is received from the
external alarm input device.
Network Speed Dome User Manual
The ID of the picture storage region in the cloud video manager. Make
sure storage pool ID and the storage region ID are the same.
58