Storage Settings; Storage - OpenEye OE-C1011D4-S User Manual

STORAGE SETTINGS

Storage

OpenEye IP cameras include an integrated microSD™ card (Memory Card) slot that can be used to record
video or images. The card slot is compatible with a microSD™ card up to 512GB.
Note Formatting the microSD card causes the camera to restart
Note Camera date and time must be synced with system or server to insure accurate recording
timestamps
Format
To format the memory card, check Enable and to confirm the operation. The system will restart when the
format is completed.
Allocate Capacity
Video (MB) – Enter the amount of storage space to be allocated only to video recordings.
Common Snapshot (MB) – This is the remaining storage after video recordings which will be
used to store snapshot images.
Video Storage Info
Storage Policy
Manual Storage – records video to the SD card continuously.
Planned Storage – camera records video to the memory card during the specified
periods. (shown below)
Off – No recorded video will be saved to the SD card.
Stream – Choose which stream is saved.
When Storage Full
Overwrite – When the SD card is full, new data will begin overwriting oldest data.
Stop – When the SD card is full, video recording will stop writing to the SD card.
Post-Record(s) – For alarm-triggered recording; this is the length of time (seconds) that
recording continues after the end of the alarm. Enter an integer range of [30–1800].
Save
37821AB 51