Line Crossing Detection - OpenEye OE-C1011D4-S User Manual

Line Crossing Detection

Rule Settings
1. Check Line Crossing Detection to enable.
2. In the Detection Rule area, click
.
3. Drag the line to set the intended position.
4. Drag the ends of the line to set the length and angle.
5. Set Trigger Direction and Sensitivity for the camera to decide from which direction to report an
intrusion detection alarm.
Trigger Direction: Set from which direction a crossed line will trigger or if it will trigger
•
when crossed from both directions.
Sensitivity: Sensitivity of detection. A greater value means higher detection sensitivity.
•
Note Setting sensitivity too high will increase the likelihood of false alerts.
6. Check either Vehicle Detection or Person Detection.
7. Choose the Vehicle Detection or Person Detection Filter Type.
8. Enable Max. Size or Min. Size to resize the filter detection box to a default size.
9. Save
40
to add a new detection area. To delete a detection area, click