Media Stream - OpenEye OE-C1011D4-S User Manual

Media Stream

You can display the established media streams from a camera. You can also set the camera to transmit
code streams by the UDP or TCP protocol to a specified IP address and port number.
Note
To configure media streams:
1. Click the + on the right side of the title bar and the Add Media Stream page will appear.
2. Select a Stream Type, and then set the IP Address and Port Number of the unicast or multicast
group for the decoding device that receives audio and video streams from the camera.
3. Toggle Persistent to Enable if you want the device to establish the media stream that you have
just configured automatically upon each subsequent restart.
4. Save
5. Click the trashcan icon to delete a created media stream.
30
Changes to the media stream will take effect after the camera has been restarted.