Table of Contents
Advertisement
Port
HTTP Port – Configure your relevant port number.
Note
HTTPS Port – The default HTTPS Port is 443; setting range: 1024 ~65535.
RTSP Port – The default RTSP port is 554; setting range: 1024 ~65535.
Note
Port Mapping
To enable Port Mapping:
1. Toggle On for Port Mapping.
2. Use the Mapping Type dropdown menu to select a type.
3. Use the UPnP Mapping dropdown menu to select a type.
4. If selecting Manual in either dropdown, the external ports must be configured.
Note
5. Save
18
If the HTTP port number has been occupied already, a "Port conflicts" message will display.
Ports 23, 81, 82, 85, 3260, and 49152 are occupied by default.
No port number can be used in duplication on more than one item.
If the configured port is already occupied, then the Status will show as inactive and a new port
must be selected.
Advertisement
Table of Contents
