ANALYTICS
Intrusion Detection
Rule Settings
1. Check Intrusion Detection to enable.
2. In the Detection Rule area, click
.
3. Drag the borders of the box to set the intended position and range.
4. Set Time Threshold and Sensitivity for the camera to decide whether to report an intrusion
detection alarm.
Time Threshold: The minimum length of time that the intruder stays in the detection area
•
before an alarm will be reported.
Sensitivity: Sensitivity of detection. A greater value means higher detection sensitivity.
•
Note
Setting sensitivity too high will increase the likelihood of false alerts.
5. Check either Vehicle Detection or Person Detection.
6. Choose the Vehicle Detection or Person Detection Filter Type.
7. Enable Max. Size or Min. Size to resize the filter detection box to a default size.
8. Save
37821AB
to add a new detection area. To delete a detection area, click
37