OpenEye OE-C1013D4-S Quick Start Manual

CONNECTIONS
6
5
4
2
1 1 RJ-45 RJ-45 - - For network and PoE connections For network and PoE connections
1 1 12vDC + 12vDC +
2 2 Power (12vDC) Power (12vDC)
2 2 GND - GND -
To restore the camera to factory defaults: To restore the camera to factory defaults:
1. Disconnect power for 30 seconds. 1. Disconnect power for 30 seconds.
3 3 Reset Button Reset Button - -
2. Reconnect power and wait 30 seconds. 2. Reconnect power and wait 30 seconds.
3. Press and hold the reset button for 20 seconds. 3. Press and hold the reset button for 20 seconds.
1 1 Audio Out + Audio Out +
2 2 GND GND
3 3 Audio In + Audio In +
4 4 GND GND
4 4 Alarm & Audio I / O Alarm & Audio I / O
5 5 Alarm Input Alarm Input
6 6 GND GND
7 7 Alarm Output Alarm Output
8 8 Alarm Output Alarm Output
5 5 Built-in Microphone Built-in Microphone - - Audio In Audio In
6 6 microSD Card Slot microSD Card Slot - - Insert the microSD card into the slot to store videos and snapshots Insert the microSD card into the slot to store videos and snapshots
Liberty Lake, WA, USA
509.232.5261
openeye.net
3
1
Power Connection Power Connection
Alarm connection Alarm connection
Ground connection Ground connection
Audio connection Audio connection
Ground connection Ground connection
Alarm connection Alarm connection
Ground connection Ground connection
Alarm connection Alarm connection
Alarm connection Alarm connection
Copyright ©2022 OpenEye.
All Rights Reserved. Information contained in this
document is subject to change without prior notice.
OpenEye does its best to provide accurate information but
cannot be held responsible for typos or mistakes.
This quick start guide provides
only basic information on the
camera's settings and operation for
initial installation. Please read the
user manual for optimal camera
configurations.
Find the latest product
documentation and software.
Scan the QR code or go to
openeye.net/downloads
QUICK START GUIDE
4MP Indoor Micro Dome
OE-C1013D4-S
37893AB