Table of Contents
Advertisement
Snapshot
The Snapshot tab is used to configure the settings for timed or continual snapshots.
To configure Snapshots:
1. Use the dropdowns to select the desired Resolution, Snapshot Interval, and the Number of
Snapshots.
2. If you desire Scheduled Snapshots, select Schedule Snapshot Mode, and designate snapshot
times.
3. Save
Parameter
Snapshot Interval
Number to Snapshot
Snapshot Mode
37821AB
Interval between two snapshots. For example, with Snapshot Interval set to 1 and
Number of Snapshot set to 2, the camera will take 2 snapshots (take one first and
then take another after 1 second).
Currently 1, 2, and 3 snapshots are allowed.
Schedule: You need to set a snapshot time, e.g., 19:12:00, which means the camera
takes a snapshot at 19:12:00.
Repeat: Allows you to set an interval (unit: sec). For example, according to the
settings shown in the figure above, 60 seconds must elapse before the camera
takes another two snapshots.
Description
27
Advertisement
Table of Contents
