CONNECTIONS
1
2 2
2
Waterproof Cable
5
4
1
1
Thread lock cap
Thread lock cap
2 2
Rubber plug
Rubber plug
3 3
RJ45 enclosure
RJ45 enclosure
Liberty Lake, WA, USA
509.232.5261
openeye.net
1
1
RJ-45
RJ-45
For network and PoE connections
For network and PoE connections
2 2
Power (12vDC)*
Power (12vDC)* Power connection
Power connection
*12vDC power input port should be plugged when not in use.
To restore the camera to factory
To restore the camera to factory
defaults:
defaults:
1. 1. Disconnect power for 30
Disconnect power for 30
seconds.
seconds.
Reset Button
Reset Button
2. 2. Reconnect power and wait 30
Reconnect power and wait 30
seconds.
seconds.
3. 3. Press and hold the reset
Press and hold the reset
button for 20 seconds.
button for 20 seconds.
Supports up to 512GB microSD
Supports up to 512GB microSD
card for Edge storage.
card for Edge storage.
MicroSD Card Slot
MicroSD Card Slot
Do not add or remove the
Do not add or remove the
microSD card when the camera
microSD card when the camera
is powered on.
is powered on.
3
1
2
4 4
Rubber "O" ring
Rubber "O" ring
5 5
Camera cable
Camera cable
Copyright ©2021 OpenEye.
All Rights Reserved. Information contained in this
document is subject to change without prior notice.
OpenEye does its best to provide accurate information but
cannot be held responsible for typos or mistakes.
This quick start guide provides
only basic information on the
camera's settings and operation for
initial installation. Please read the
user manual for optimal camera
confi gurations.
Find the latest product
documentation and software.
Scan the QR code or go to
openeye.net/downloads
QUICK START GUIDE
2MP Outdoor IP Turret
OE-C1016T2
37682AA
Need help?
Do you have a question about the OE-C1016T2 and is the answer not in the manual?
Questions and answers