Functioning Of The Unit - WAGNER Brillux SUPER FINISH 23 PRO SELECT Operating Manual

EN SuperFinish 23 Pro Select
GENERAL VIEW OF APPLICATION / DESCRIPTION OF UNIT
3.4

FUNCTIONING OF THE UNIT

The following section contains a brief description of the tech-
nical construction for better understanding of the function:
SF 23 Pro Select is an electrically driven high-pressure paint
spraying equipment.
The electric motor (1) drives the hydraulic pump via planetary
gears (2). A piston (3) is moved up and down so that hydraulic
oil is moved under the diaphragm (4) which then moves.
In detail:
The downwards movement of the machine opens the disk in-
let valve (5) automatically and coating material is sucked in.
During the upwards movement of the diaphragm, the coating
material is displaced and the outlet valve opens while the inlet
valve is closed.
The coating material flows under high pressure through the
high-pressure hose to the spray gun and is atomized when it
exists from the tip.
The pressure control valve limits the set pressure in the hy-
draulic oil circuit and thus also the pressure of the coating
material.
A pressure change when the same tip is used also leads to a
change in the amount of paint atomized.
5
4
3 2 1
36