Two-Position Operation; Transportation; Technical Data - WAGNER Brillux SUPER FINISH 23 PRO SELECT Operating Manual

EN
GENERAL VIEW OF APPLICATION / DESCRIPTION OF UNIT
3.6

TWO-POSITION OPERATION

The Super Finish 23 Pro Select can be used both horizontally
and vertically.
a) Horizontal operation:
For use with a hopper
b) vertical operation:
For direct intake with a rigid
suction system.
3.7

TRANSPORTATION

Pull out the drawbar
until it audibly enga-
ges.
To retract the drawbar
press the two locking
buttons (1).
Transportation in vehicle
Secure the unit in the vehicle by means of suitable fasteners.
The device can be placed on its side if necessary. In this case,
please ensure that no attachments can be damaged. Atten-
tion: Paint or solvent residues can escape from the connec-
tions!
38
1
SuperFinish 23 Pro Select
3.8

TECHNICAL DATA

Voltage :
Fuses :
Unit connecting line :
Max. current consumption:
Degree of protection :
Rated input of device:
Max. operating pressure :
Max. volume flow :
Volume flow at 12 MPa
(120 bar) with water :
Max. temperature of the
coating material :
Max. viscosity :
Empty weight :
Hydraulic oil filling
quantity :
Hydraulics housing
Gears (grease)
Max. vibration at the spraygun : lower than 2.5 m/s²
Max. sound pressure level:
*Place of measurement: 1 m distance from unit and 1.60
m above floor, 12 MPa (120 bar) operating pressure,
reverberant floor
230 -240 V AC, 50 Hz
16 A time-lag
6 m long, 3 x 1.5 mm²
7.0 A
IP 54
1.3 kW
25 MPa (250 bar)
2.6 l/min
2.3 l/min
43 °C
20,000 mPas
38.3 kg
1.3 liter
45 g
75 dB (A)*