Description Of Unit; Airless Process; Functioning Of The Unit; Technical Data - WAGNER ProSpray 3.29 Owner's Manual

descriptiOn Of unit

3
deScRIPTIoN oF uNIT
3.1

AIRLeSS PRoceSS

The main areas of application are thick layers of highly viscous
coating material for large areas and a high consumption of
material.
A piston pump takes in the coating material by suction and
conveys it to the tip. Pressed through the tip at a pressure of
up to a maximum of 221 bar (22.1 MPa), the coating material
is atomised. This high pressure has the effect of micro fine
atomisation of the coating material.
As no air is used in this process, it is described as an AIRLESS
process.
This method of spraying has the advantages of finest
atomisation, cloudless operation and a smooth, bubble-free
surface. As well as these, the advantages of the speed of work
and convenience must be mentioned.
3.2

FuNcTIoNING oF THe uNIT

In the following there is a short description of the technical
construction for better understanding of the function.
Wagner PS 3.29 / 3.31 units are electrically driven high-pressure
spraying units.
A gear unit transfers the driving force to a crankshaft. The
crankshaft moves the pistons of the material feed pump up and
down.
The inlet valve is opened automatically by the upwards
movement of the piston. The outlet valve is opened when the
piston moves downward.
The coating material flows under high pressure through the
high-pressure hose to the spray gun. When the coating material
exits from the tip it atomizes.
The pressure control knob controls the volume and the
operating pressure of the coating material.
40
3.3

TecHNIcAL dATA

PS 3.29
Voltage
220~240 VAC, 50/60
max. current consumption
Power cord
3 x 1.5 mm2 – 6 m
Acceptance capacity
1725 Watt
max. operating pressure
221 bar (22.1 MPa)
Volume flow at 12 mPa (120 bar) with water
3.0 l/min
max tip size
0.029 inch – 0.73 mm
max. temperature of the coating material
max viscosity
25.000 MPa·s
Weight
Special high-pressure hose
DN 6 mm, 15 m,
connection thread M
16 x 1.5
dimensions (L x W x H)
590 x 529 x 726 mm
Altitude
This equipment will
operate correctly
up to 2000 m above
mean sea level
Vibration
Spray gun does not
exceed 2.5m/s2
max sound pressure level
* Place of measurement: 1 m distance from unit and
1.60m above floor, 12 MPa (120 bar) operating pressure,
reverberant floor
PS 3.29 / 3.31
PS 3.31
220~240 VAC, 50/60
Hz Hz
7.5 A 8 A
3 x 1.5 mm2 – 6 m
1840 Watt
221 bar (22.1 MPa)
3.8 l/min
0.032 inch – 0.81 mm
43°C 43°C
25.000 MPa·s
43.5 kg 43.5 kg
DN 6 mm, 15 m,
connection thread M
16 x 1.5
590 x 529 x 726 mm
This equipment will
operate correctly
up to 2000 m above
mean sea level
Spray gun does not
exceed 2.5m/s2
80 dB* 80 dB*