A Message Appears - Canon imageCLASS LBP122dw User Manual

A Message Appears

If a message appears on the operation panel, select the message from the list below, and check how to troubleshoot
the problem.
Cannot analyze the authentication server certificate.(P. 326)
Cannot find the access point.(P. 326)
Cannot print. A non-Canon or counterfeit cartridge may be in use. Close: Press OK(P. 326)
Cannot print RX data.(P. 327)
Cart. Comm. Error Cannot print. A non-Canon or counterfeit cartridge may be in use. Close: Press
OK(P. 327)
Cartridge Comm. Error Problems caused by non-Canon cart. not covered by warranty. Close: Press
OK(P. 327)
Change the authentication password.(P. 327)
Check the authentication settings.(P. 328)
Could not connect.(P. 328)
Could not connect. Check the encryption key settings.(P. 328)
Could not connect. Device will restart.(P. 328)
Could not connect. Max connections to access point reached(P. 328)
Could not connect using the wireless LAN.(P. 329)
Could not connect using WPS.(P. 329)
Could not detect any connections from wireless devices.(P. 329)
Could not perform cleaning.(P. 330)
Could not perform Open System auth. Chk encryp. key set.(P. 330)
Could not perform Shared Key auth. Chk encryp. key set.(P. 330)
Direct Connection terminated.(P. 330)
Easy Conn. via PC ended due to timeout Device will restart.(P. 331)
Encryption key is not set correctly. Check the encryption key settings.(P. 331)
Encryption key not set correctly. Check encryption key set.(P. 331)
End of Cart. Lifetime(P. 331)
IEEE 802.1X error. Cannot analyze auth. server certificate.(P. 331)
IEEE 802.1X error. Change the auth. password.(P. 332)
IEEE 802.1X error. Check the auth. settings.(P. 332)
IEEE 802.1X error. Configure correct authentication info.(P. 332)
IEEE 802.1X error. Configure the info. required for auth.(P. 332)
IEEE 802.1X error. No reply from the destination.(P. 332)
IEEE 802.1X error. The auth. server cert. has expired.(P. 332)
IEEE 802.1X error. The auth. server cert. is incorrect.(P. 332)
Incorrect number of characters/invalid characters entered.(P. 333)
Low Cartridge Level(P. 333)
Mem. Full (Skip Error)(P. 333)
Memory is full.(P. 333)
No Paper(P. 333)
No reply from the destination.(P. 333)
No response from host.(P. 334)
Paper jammed.(P. 334)
Prepare a cartridge.(P. 334)
Set the correct authentication information.(P. 334)
Set the information necessary for authentication.(P. 334)
Size/Settings Mismatch(P. 335)
The authentication server certificate has expired.(P. 335)
The authentication server certificate is incorrect.(P. 335)
Use Remote UI to set info. necessary for authentication.(P. 335)
Troubleshooting
325
94RC-0CA