Palm Treo 800W User Manual page 334

4. Select the first list, and then select the time zone for your
home location.
5. Select the hour, and then press Up
increase or decrease the hour setting. (Repeat this process
for the minutes, seconds, and AM/PM settings.)
6. (Optional) Select Visiting and set the information for a
location that you visit often.
7. Press OK
8. If prompted, select Yes to accept your changes.
Tip
Synchronizing the Date, Time, and Time Zone With the Network
By default, your Treo synchronizes the date, time, and time zone with your wireless service
provider's network whenever your phone is on and you are inside a coverage area.
1. Press Start
2. Select the System tab, and then select Clock & Alarms
3. Select the More tab.
4. To enter the date and time manually, uncheck the Enable local network time box.
5. If you want to use the Home or Visiting settings (see "Setting the Date and Time" on
page 333) regardless of the network time, uncheck the Use network time zone box.
6. Press OK
7. If prompted, select Yes to accept your changes.
Note
334
.
To display the time in all your applications, select the More tab and check
the Display the clock on the title bar in all programs box. To set the display
format for the date and time, see "Setting Display Formats" on page 323.
and select Settings.
.
If you turn off the Use network time zone setting and later turn it on again,
you need to turn your phone off and then on for this setting to take affect.
Section 6C: Customizing Your Palm
or Down to
.
®
Treo™ 800 Smart Device
W