Palm Treo 800W User Manual page 213

3. Aim your Treo, as you would any camera, to frame the
subject in the device's screen. (Your Treo has a self-portrait
mirror next to the camera lens on the back of your device.
Use the mirror when you're taking a picture or video and
you want to be in the picture too.)
4. (Optional) Adjust any of the following:
Zoom: Press Up
out.
Brightness: Press Right
so you can take pictures in low-light environments, or press Left
brightness.
Resolution: Press Menu
select Resolution to change the image quality.
Tip
5. (Optional) Set a five-second timer: Press Menu
then select Timer.
6. Press Center
7. Hold your Treo still until the picture renders, and then press OK
or press Menu
8. Do either of the following:
Press Center
Press Thumbnails
Did you know?
Section 4B: Working With Your Pictures and Videos
to zoom in, or Down
to increase the brightness,
(right softkey) and
You can also adjust the zoom and brightness by pressing Menu and
selecting Zoom or Brightness .
to capture the picture or start the timer.
(right softkey) and select Delete to discard the picture.
to take another picture.
(left softkey) to return to Thumbnails view.
After three minutes of inactivity when you are previewing an image, the
camera goes into standby mode. Press any key or tap the screen to return
to the image preview.
to zoom
(right softkey), select Mode, and
to save the picture,
to decrease the
213