Palm Treo 800W User Manual page 134

11. Enter your incoming mail server address, select your
account type, and then press Next
12. Enter your account username and password.
13. If you want your password entered automatically, check the
Save password box; if you want to enter your password
each time you access this account, do not check this box.
(For a corporate email account, ask your system
administrator if it is OK to store your corporate email
password on your Treo. If it is not OK, don't check the Save
password box.)
14. Press Next
15. Enter the following outgoing mail settings:
Outgoing (SMTP) mail server: Enter the server name.
Outgoing server requires authentication: Check the box
if your outgoing mail server requires authentication.
Use the same user name and password for sending
e-mail: Check the box if the server requires you to use
your account username and password when sending
email.
16. (Optional) Select the Advanced Server Settings link, select
the following settings, and then press Done
Require SSL for Incoming e-mail: Check the box if your
account requires SSL for incoming messages.
Require SSL for Outgoing e-mail: Check the box if your
account requires SSL for outgoing messages.
Network connection: Select the type of connection to
use for sending and receiving email.
134
(right softkey).
(right softkey).
(left softkey):
Section 3B: Using the Email Features