Palm Treo 800W User Manual page 197

1. If necessary, prepare the device you want to connect with to
accept a new connection. (Check the device's
documentation for details.)
2. Go to your Today screen (see "Accessing Your Today
Screen" on page 76), and then tap Bluetooth
3. Select the Mode tab and check the Turn on Bluetooth box
to turn on the Bluetooth feature on your Treo. (Wait about
10 seconds for the Bluetooth feature to activate.)
4. If you're setting up a connection with a computer, check the
Make this device discoverable to other devices box.
Tip
5. Select the Devices tab, and then select Add new device.
6. Wait for your Treo to search for devices and to display the device list.
7. Select the device you want to connect with, and then press Next
8. If you're prompted to enter a passkey, enter the same passkey on your Treo and on the
other Bluetooth device, and then press Next
Important
Section 3F: Using Wireless Connections
To prevent unwanted devices from connecting to your Treo, leave the Make
the device visible to other devices box unchecked except when you're
connecting with a computer or receiving information from another device.
Some Bluetooth devices have a predefined passkey. If your Bluetooth
device has a predefined passkey, your Treo attempts to enter the passkey
for you. If the attempt is unsuccessful, you can find the predefined passkey
in the documentation for your Bluetooth device.
Other Bluetooth devices provide a screen where you enter a passkey that
you make up. In either case, you must use the same passkey on both your
Treo and the Bluetooth device. We recommend that where possible, you
make up a passkey of 16 alphanumeric characters (letters and numerals
only) to improve the security of your Treo. The longer the passkey, the more
difficult it is for the passkey to be deciphered.
.
(right softkey).
(right softkey).
197