Palm Treo 800W User Manual page 198

9. Press Done
You can now communicate with this device whenever it is within range and the Bluetooth
feature on your Treo is turned on. The range varies greatly, depending on environmental
factors. The maximum is about 30 feet (10 meters).
Tip
Sending Information Over a Bluetooth Connection
You can send an individual entry or file.
1. Make sure the receiving device is ready to receive a
Bluetooth connection.
2. Highlight the entry or file you want to send.
3. Press Menu
don't see a Beam command, select Send... > Beam
instead. The Beam and Send menu items change names
based on the type of item you highlighted.)
4. Select the receiving device in the list.
When the transmission is complete, Done appears next to the name of the receiving device.
Tip
198
(left softkey), and then press OK
To modify or delete an established partnership with a device, go to the
Bluetooth Settings screen and select Devices . Highlight the connection
you want to change or remove, press and hold Center on the 5-way , and
then select Edit or Delete . A deleted device can no longer automatically
connect with your Treo.
(right softkey) and select Beam. (If you
Check your battery level before establishing a Bluetooth connection. If the
battery level is low, you can't make a Bluetooth connection.
.
Section 3F: Using Wireless Connections