Palm Treo 800W User Manual page 194

Disconnecting From a Wi-Fi Network
To disconnect from a Wi-Fi network, do one of the following:
To save any settings you entered, press and hold Wi-Fi
network. The next time you're within range and the Wi-Fi feature is turned on, your Treo
automatically connects to this network.
Press Start
Highlight the network from which you want to disconnect, and then press Disconnect
(left softkey).
To remove the network settings from memory, press Menu
Remove Settings. The next time you're within range and the Wi-Fi feature is turned on, you
must re-create the connection to connect to this network.
Customizing Wi-Fi Settings
1. Press Start
2. Select the Connections tab, and then select WiFi Prefs
3. On the Power tab, set any of the following:
Enable Power Save Mode: Conserve battery power
when Wi-Fi is turned on. For optimum battery
performance, leave this option enabled.
Connection: Set when the Wi-Fi feature is on and when
your Treo attempts to search for networks.
On Button Press: Leave the Wi-Fi feature off until you
press Wi-Fi
for available networks.
Always On: Leave the Wi-Fi feature on. Your Treo searches for available
networks whenever the screen is awake. If a network to which you previously
connected is available, your device automatically connects to that network. To
prevent your Treo from searching for networks, press and hold Wi-Fi
the Wi-Fi feature off.
194
, select Settings, select the Connections tab, and then select Wi-Fi
and select Settings.
to turn it on. After you turn the Wi-Fi feature on, your Treo searches
to disconnect from the Wi-Fi
(right softkey) and select
.
Section 3F: Using Wireless Connections
.
to turn