Palm Treo 500v User Manual page 18

2
S E T T I N G U P
2 If the battery is installed, remove it.
Slide your finger under the left side of
the battery and lift up to remove it.
3 With the metal contacts facing the
battery compartment, slide the SIM
card into the cutout in the lower-left
corner of the compartment until you
feel the card click into place. Align the
notches to make sure you have the card
oriented correctly.
4 Align the metal contacts on the battery
with the contacts inside the battery
compartment, insert the battery into the
compartment at a 45-degree angle, and
then press it into place.
18
I N S E R T I N G T H E S I M C A R D A N D B A T T E R Y
Notch
5 Slide the battery door back into place.
6 Press and hold Power
Palm logo appears.
®
If your smartphone does not turn on after
TIP
you insert the battery, you need to connect it
to the AC charger to charge it (see Charging
the battery). If it still doesn't start, perform a
soft reset (see Performing a soft reset).
7 Follow the onscreen instructions to
finish the installation.
8 If your SIM card is not already activated,
follow the activation steps provided by
your network operator, or contact your
network operator directly for
assistance. If you plan to use email and
web browsing, you need a data service
Battery
contacts
Smartphone
contacts
until the