Palm Treo 500v User Manual page 225

Inserting and removing expansion cards
1 Slide the battery cover off the back of
your smartphone and remove the
battery.
2 Gently push the guide on the expansion
card tray toward the side of battery
compartment (1) until it pops up (2).
2
1
3 Lift the tray until it is fully extended, and
then insert the expansion card into the
tray (1). The gold contacts on the card
should be toward the bottom of your
smartphone and should be visible.
Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S
1
4 Press the tray down toward the bottom
of the battery compartment (2).
5 Gently push the guide away from the
side of the battery compartment until it
locks into place.
6 Reinsert the battery and replace the
battery cover.
7 Press and hold Power
Palm logo appears.
®
2
until the
U S I N G E X P A N S I O N C A R D S
12
225