Navigate To Cursor Position; Navigate A Route - Lowrance HDS PRO Operator's Manual

82
F
Vessel symbol
Indicates distance and bearing relative to the intended
course. If the XTE (Cross Track Error) exceeds the defined XTE
limit, this is indicated with a red arrow including the
distance from the track line.
Refer to "" on page 0 .

Navigate to cursor position

You can start navigating to a cursor position on any chart, radar, or
sonar panel.
Position the cursor at the selected destination on the panel, and
then select the go to cursor menu option.
Ú Note:
The go to cursor menu option is not available if you are
already navigating.

Navigate a route

You can start navigating a route from the chart panel, steer panel, or
from the Route dialog.
When route navigation is started, the menu expands and shows
options for canceling the navigation, for skipping a waypoint, and
for restarting the route from current vessel position.
Starting a route from the chart panel
Activate a route on the panel, and then select the route navigation
option from the menu.
You can select a routepoint to start navigating from a selected
position.
Starting a route from the steer panel
Select the start route option on the menu, and then details from the
dialogs.
Start navigating a route from the edit route dialog
You can start navigating from the edit route dialog. Activate the
dialog by:
Navigating | HDS Pro Operator Manual