Dangerous Targets - Lowrance HDS PRO Operator's Manual

Dangerous radar moving target (yellow), with trail
when target history is enabled. The yellow color is
shown when the radar palette is black/red or black/
green.
Dangerous radar moving target (purple), with trail
when the target history is enabled. The purple color
is shown when the radar palette is white/red.
Dangerous radar dangerous moving target (red),
with trail when target history is enabled. The red
color is shown when the radar palette is black/
yellow.
Associated target. When the radar and the AIS signal
acquire the same target, the system will display the
target with one symbol.
This reduces the number of AIS symbols and radar
targets on the PPI.
The association function also compensates for a
possible failure in one of the two targets, e.g., if the
radar target is positioned behind an island, the
system keeps tracking and visualizing the AIS target.
Ú Note:
Selected radar target.
Lost radar target.

Dangerous targets

Radar targets are defined as dangerous targets in the Vessels and
tracked targets dialog (TCPA/CPA settings), refer to "Vessels and tracked
targets" on page 199.
For the system to display dangerous target alert messages when
dangerous targets are detected, the Dangerous vessel option must
be enabled in the Vessels section of the Alarms settings dialog.
Radar| HDS Pro Operator Manual
The radar target continues to be analyzed
by the system when the target association is
active.
193