Disconnect The Phone From The Unit; Reconnect A Bluetooth® Enabled Phone; Phone Notifications - Lowrance HDS PRO Operator's Manual

To pair a phone listed as other devices in the dialog:
• select the phone you want to pair, and follow the instructions on
the phone and on the MFD
When paired, the phone is moved to the paired device section in
the dialog.
To connect a paired phone:
• select the phone you want to connect to
Incoming messages and phone notifications will now pop-up on
the MFD.

Disconnect the phone from the unit

1.
Open the Wireless settings dialog
2.
Select the Bluetooth® devices option
3.
Select the connected phone in the paired devices list
4.
Select the disconnect option if the phone is to be remembered
for future connection. Alternatively, select forget if you do not
plan to connect the phone in the future.
Reconnect a Bluetooth® enabled phone
This procedure is for reconnecting a phone that was previously
connected.
Before performing this procedure the phone's Bluetooth® feature
and phone visibility must be turned on. Also, the unit's phone
pairing must be enabled.
1.
Select the phone icon in the toolbar. This opens the Bluetooth®
Devices dialog.
2.
Select the phone in the dialog
3.
Select the connect option.
When the phone and unit are connected, a phone icon is shown on
the home page.

Phone notifications

After the phone and unit are paired and connected, use the phone
icon to display the list of messages and the call history.
Using your phone with the
When the phone and the unit are connected,
a phone icon is shown on the home page.
MFD| HDS Pro Operator Manual
231