Autopilot Settings - Lowrance HDS PRO Operator's Manual

For more information, refer to "Waypoints, routes, and trails" on page 70.

Autopilot settings

The options in the Autopilot settings dialog can vary.
Chart compass
Select to display a compass symbol around your boat on the chart
panel. The compass symbol is off when the cursor is active on the
panel.
Select active autopilot
Selects if the autopilot controls the trolling motor or the outboard
motor(s).
Auto hide autopilot bar
Controls whether the autopilot information bar is shown when the
autopilot is in standby.
Arrival mode
The autopilot switches from navigation mode to the selected arrival
mode when the vessel reaches the destination point.
Standby
Disengages the autopilot. The trolling motor is controlled by hand-
held remote or by foot pedal.
149
Trolling motor autopilot| HDS Pro Operator Manual