Fish Renderings; Viewing Image History; Setting Up The Image - Lowrance HDS PRO Operator's Manual

Fish renderings

When objects are identified in the water column, they are shown as
clusters of dots. The point color corresponds to the target intensity,
and the point colors are automatically adjusted to complement the
chosen palette.

Viewing image history

The highlighted part of the history bar shows the image you are
currently viewing in relation to the total image history stored.
The history bar appears by default when the cursor is active. You
can turn off the history bar, have it always shown at the top of the
screen, or have it appear only when the cursor is active. Refer to
"Clear live history" on page 113.
The history bar is at the top of the screen on 3D images.
You pan the image history by dragging on the image, or by
dragging the highlighted region of the history bar.
To resume scrolling showing current data, clear the cursor.

Setting up the image

Source
Ú Note:
Available only if multiple sources with the same
capability are available.
Used to specify the source for the image in the active panel.
You can display different sources simultaneously, using a multi-
panel page configuration. Menu options for each panel are
independent.
Ú Note:
Using transducers at the same frequency can cause
interference.
For source setup information, refer to the HDS Pro Installation
Manual.
3D Sonar | HDS Pro Operator Manual
111