Nmea 2000® Rgbw Lighting Support - Lowrance HDS PRO Operator's Manual

NMEA 2000® RGBW Lighting support
Warning:
IT IS THE USER'S RESPONSIBILITY TO
OPERATE THIS DEVICE IN COMPLIANCE WITH ALL
APPLICABLE LAWS, REGULATIONS AND ORDINANCES.
Navico does not assume any responsibility for any fines,
penalties, or damages that may be incurred as a result
of any state or local law or ordinance relating to the
alteration of your vessel's lighting. Refer to local
maritime laws and regulations to ensure lighting is
compliant.
An RGBW lighting controller can be connected to the NMEA 2000®
network and configured to allow control of your vessel's lighting
from the control bar in the multi-function display (MFD). The new
controls allow the user to customize lighting color, adjust
brightness, synchronize lights with music, create various lighting
scenes, and independently control and sync multiple zones of
lighting on the vessel.
Enabling/disabling the lighting controller
When a lighting controller is connected to the NMEA 2000®
network, it appears in the control bar. If it doesn't automatically
appear in the control bar, verify the controller supports the NMEA
2000® standard or check if the controller is visible in the device list.
To manually enable/disable the lighting controller, go to Settings >
Advanced settings > Features, and enable/disable RGBW
Lighting.
Integration of 3 party devices| HDS Pro Operator Manual
263