Selecting Chart Source; Vessel Symbol; Zooming The Chart; Panning The Chart - Lowrance HDS PRO Operator's Manual

will be displayed until you re-insert the card or manually switch
back to the preloaded cartography.

Selecting chart source

Available chart sources are listed in the menu.
If you have identical chart sources available, the system
automatically selects the chart with most chart details for your
displayed region.
Showing dual chart sources
If you have different chart sources available, you can show two
different chart sources simultaneously on a page that has two chart
panels.
Activate each chart page and select its source in the menu.

Vessel symbol

When the system has a valid GPS position lock, the vessel symbol
indicates vessel position. If no GPS position is available, the vessel
symbol includes a question mark.
If heading information is not available, the vessel icon orientates
itself using COG (Course over Ground).

Zooming the chart

The chart range scale and range rings interval (when turned on) are
shown on the chart panel. You change the scale by zooming the
chart in or out.

Panning the chart

You can move the chart in any direction by:
• Dragging the screen
• Move the cursor to the edge of the chart panel using the arrow
keys

Chart orientation

You can specify how the chart is rotated in the panel.
Charts | HDS Pro Operator Manual
51