Page 1
Press to activate/deactivate the cursor. Cursor/ Waypoint • Press and hold to save a waypoint. • Press to display the System Controls dialog. Power • Press and hold to power the unit on/off . *988-12656-001* Hook Reveal | Quick Guide - EN...
Page 2
Repeat short presses on the Power key to cycle the backlight brightness. The Home page Tools panel Page icons Customize option ¼ Note: Page icons on the Home page vary with model type. Hook Reveal | Quick Guide - EN...
Page 3
Zoom the image by using the Zoom keys. • Pan the image in any direction by using the arrow keys. • Display item information by positioning the cursor on an item and then pressing the Menu/Enter key. Hook Reveal | Quick Guide - EN...
Page 4
To display the trails dialog: Waypoints, Routes, Trails Select from the Home page Trails Select the tab in the dialog Select the trail you want to edit Change chart source if card is inserted Hook Reveal | Quick Guide - EN...
Page 5
Press and hold the Cursor/Waypoint key to save a new waypoint. • With cursor inactive, the waypoint is placed at the vessel's position. • With cursor active, the waypoint is placed at the cursor position. Hook Reveal | Quick Guide - EN...
Page 6
Activate a MOB waypoint by pressing both Zoom keys simultaneously. Settings dialog Used for system configuration. Product manuals For the full Operator manual, technical specifications and declarations, refer to the product website on: www.Lowrance.com. Hook Reveal | Quick Guide - EN...
Need help?
Do you have a question about the Hook Reveal and is the answer not in the manual?
Questions and answers
what are first and second button to push to get started