Card Layout For The Megaraid Sas 9280-8E Raid Controller; Sas 9280-8E And Sas 9280De-8E Raid Controllers - Connectors - LSI MegaRAID SAS 9240-4i User Manual

Figure 3.4 Card Layout for the MegaRAID SAS 9280-8e RAID
Controller
J1A1
J1A2 J1A3
J1A4
Port
4-7
J1B1
Port
0-3
85040-00
Note: Connectors J6A1, J6A2, and J6A3 are behind the
LSIiBBU07 when the iBBU is installed, but they are still
accessible.
Table 3.4 describes the jumpers and connectors on the SAS 9280-8e
RAID controller.
Table 3.4 SAS 9280-8e and SAS 9280DE-8e RAID Controllers –
Connectors
Connector Description
J1A1 Universal Asynchronous
Receiver/Transmitter
(UART) debugging
J1A2 Test header
J1A3 Set Factory Defaults
connector
J1A4 x4 SAS Ports 4–7
MegaRAID 6Gb/s SAS RAID Controller Family
Copyright © 2009 by LSI Corporation. All rights reserved.
Comments
4-pin connector
Reserved for LSI use.
2-pin connector
Reserved for LSI use.
2-pin connector
Reserved for LSI use.
SFF-8088 x4 external mini SAS
connector
Connects the cables from the controller
to SAS drives or SATA II drives, or a SAS
expander.
J6A2
J6A1 J6A3
J6B1
J6B2
3-9