LSI MegaRAID SAS 9240-4i User Manual page 36

1-18
Table 1.2 MegaRAID 6Gb/s SAS RAID Controller Features (Cont.)
Specification
Cache function
Multiple virtual drives
per controller
Online capacity
expansion
Dedicated and global
hot spares
Hot-swap devices
supported
Non-drive devices
supported
Mixed capacity drives
supported
Number of external
connectors
Number of internal
connectors
Hardware exclusive
OR (XOR) assistance
Direct I/O
Architecture
Overview
Copyright © 2009 by LSI Corporation. All rights reserved.
MegaRAID SAS 9240-4i, SAS 9240-8i, SAS 9260-4i,
SAS 9260-8i, SAS 9260-8e, SAS 9260DE-8i, SAS
9280-4i/4e, SAS 9280-8e, and SAS 9280DE-8e RAID
Controllers
Write-back, write-through, adaptive read ahead,
non-read ahead, read ahead, cache I/O, direct I/O
Up to 64 (this value is dependent on the firmware)
Yes
Yes
Yes
Yes
Yes
• MegaRAID SAS 9280-4i/4e RAID controller – One
SFF-8088 x4 external mini SAS connector
• MegaRAID SAS 9280-8e RAID controller – Two SFF-
8088 x4 external mini SAS connectors
• MegaRAID SAS 9280DE-8e RAID controller – Two
SFF-8088 x4 external mini SAS connectors
• MegaRAID SAS 9240-4i RAID controller – One
SFF-8087 x4 internal mini SAS connector
• MegaRAID SAS 9240-8i RAID controller – Two
SFF-8087 x4 internal mini SAS connectors
• MegaRAID SAS 9260-4i RAID controller – One
SFF-8087 x4 internal mini SAS connector
• MegaRAID SAS 9260-8i RAID controller – Two
SFF-8087 x4 internal mini SAS connectors
• MegaRAID SAS 9260DE-8i RAID controller – Two
SFF-8087 x4 internal mini SAS connectors
• MegaRAID SAS 9261-8i RAID controller – Two
SFF-8087 mini-SAS 4i connectors
• MegaRAID SAS 9280-4i/4e RAID controller – One
SFF-8087 x4 internal mini SAS connector
Yes
Yes
Fusion-MPT