Table of Contents
Advertisement
Follow these steps to connect the cable from your controller to a drive
enclosure.
Note:
The SAS 9280-8e RAID controller is shown as an example.
You can connect other SAS controllers with external SAS
port connectors in the same way.
Step 1. Connect the connector on one end of the cable to external port
J1A4 or J1B1 on the SAS 9280-8e RAID controller, as shown
in
Figure
2.6.
Step 2. Connect the other end of the cable to the external port on the
drive enclosure.
Figure 2.6
Connecting the SAS 9280-8e RAID Controller to a Drive
Enclosure
To Drive Enclosure
Mini SAS x4
Cable Plug
Connector
SAS Device Cables and Connectors
Copyright © 2009 by LSI Corporation. All rights reserved.
85040-10
iBBU (Top View)
2-11
Hide quick links:
Advertisement
Table of Contents
