Advertisement
Quick Links
Advertisement
Related Manuals for MicroPower SMP
Summary of Contents for MicroPower SMP
- Page 1 SERVICE CHARGER User manual...
- Page 2 SMP - Service charger Safety..................................3 Safety precautions............................... 3 Warning information..............................5 Graphical symbols................................5 Introduction................................6 Receiving..................................6 Installation.................................. 6 Operation..................................6 Contact information..............................7 2023-01-25...
-
Page 3: Safety Precautions
SMP - Service charger Valid for SMP 120/10 Battery charger Safety Safety precautions Read the instructions. The manual contains important safety and operating instructions. Always keep this manual nearby the product. Read and understand this instruction, the battery instruction provided by your battery manufacture, and your employer’s safety practice, before using, installing, or servicing the product. -
Page 4: Explosive Gases
SMP - Service charger WARNING, risk of electric shock. High output voltage. Do not touch uninsulated battery terminals, con- nectors or other live electrical parts. WARNING Disconnect the battery and power supply before maintenance, servicing or dismantling. Do not touch uninsulated battery terminals, connectors or other live electrical parts. -
Page 5: Warning Information
SMP - Service charger Warning information Hazardous situations and precautions are presented in the text as follows. WARNING Indicates a potentially dangerous situation. Death or serious injury may occur if appropriate precautions are not taken. CAUTION Indicates a situation where damage or injury could occur. If it is not avoided, minor injury and/or damage to property may result. -
Page 6: Installation
SMP is a perfect help when servicing of batteries and chargers since it is so small and handy. This unit is extremely suitable for the purpose of desulphating batteries. It is also useful as an aid to start deeply discharged batteries. -
Page 7: Contact Information
Action to be taken: 1. Connect the SMP to the battery and turn on the charger using the mains switch on the back of the SMP. 2. Press the SET button and adjust the voltage limit to 67.2 V using the VOLTAGE knob.