Label Formatting Commands; Language Description - Godex EZ-2200 Programmer's Manual

Label formatting commands

Define field data, such as Line, Rectangle, Barcode, Text and image.
Description
1. Define date layout
2. Serial number setting
3. Terminate label formatting mode and print label E
4. Graphic command
5. Line command
6. Rectangle
7. Table
8. Define time layout formatting
9. Graphics
10. Text
11. Barcode
12. PDG 417
13. Maxicode
14. DataMatrix Code
15. Define variable field
16. Pattern command
17. Downloading character sets to memory

1-2. Language Description

Rules and syntax
EZPL commands have parameter strings associated with them;
The commands begin with a letter as ID for each function.
•
The comma (,) is the delimiter to separate each parameter.
•
The CR [Carriage Return: decimal (13), hex (oD) signifies the end of every command.
•
Control and Setup commands use the tilde (~) and caret (^) prefix.
•
Label Formatting commands have no prefix.
•
Example: "~Ea,name,length ". "E" is an image download command, and (a,name,length) are three parameters.
Setup commands
1. Printing mode
Syntax : ^Ax
Parameter : x = D or T
Description : x = D , Direct thermal mode
x = T , Thermal transfer mode
2. Stop position setting
Syntax : ^Ex
Parameter : X = 0~40 (unit : mm)
Description : Feed paper to desired stop position.
3. Setting Print darkness
Syntax : ^Hx
Parameter : X = 00 ~ 19
Description : Set printing darkness.
Command
Daa|bb|cc
Cx,ys, value,prompt
Gwxxx
La,x, y, x1, y1
Rx, y, x1,y1, lrw, ubw
Hx,y,row_count,col_count,row_width,col_width,line_wi
dth
Th|m|s
Yx, y, name
At, x, y, x_mul, y_mul, gap, rotation, data
Bt,x,y,narrow,wide,height,rotation,readable,data
Px,y,w,h,r,c,ec,len
Mx, y, sno, nos, mode, ccode, zip, class, rotation,
message
Xp1, p2, p3, data
Vxx, length, prompt
Qx, y, width, height
Vt, x, y, x_mul, y_mul, gap, rotation, data
3
Page
8
8
8
8
9
9
9
9
9
10
10
11
11
11
11
12
12