Godex EZ-2200 Programmer's Manual page 5

4. Number of pages printed
Syntax : ^Px
Parameter : x = 1 ~ 32767
Description : Set how many labels to print; and it will initiate the program.
5. Label length
Syntax : ^Qx,y(,z )
Die cut label：(See fig. 1)
x = Label length (unit : mm)
y = Gap length (mm)
Parameter : EX.
^Q25,3
(x=25,y=3) mm
Plain paper:
x = Label length (unit : mm)
y = 0 (constant)
z = Feed paper length (unit : mm)
Black mark label:
x = Label length (unit : mm)
y = Black mark width (mm)
z = Black line to top of form position.
z+ : When the position is outside the black mark.
z- : When the position is within the black mark.
EX.
^Q25,4,3+
(x=25, y=4, z=3+) mm
^Q25,4,3-
(x=25, y=4, z=3-) mm
Description : Set label size (length, gap length, [plain paper feed length])
6. Speed setting
Syntax : ^Sx
Parameter : x=1 to 6 (inch/sec)
Description : Set printing speed
7. Number of copies per label
Syntax : ^Cx
Parameter : X = 0 ~ 32767
Description : Number of copies of the same label.
8. Row column adjustment
Syntax : ^Rx
Parameter : x = 0 ~ 399 dots
Response : None
Description : Set left margin
9. Label format begin sign
Syntax : ^L
Parameter : None
Descripton : Set label begin sign
x
y
4
paper feed
direction