Loading The Label Roll Module 012 - Godex RT860i User Manual

2
Printer Setup
2.3 Loading the Label Roll Module
Loading the Label Stock on the Printer
LABEL STOCK
1. Unlock the ribbon catch and pull to open the label guide plate.
Pull to open
2. Place the label stock on label supply hubs. Make sure the label stock is aligned to both hubs.
Adjust the label guide plates to fix the label width.
Remember to push the release catch when moving the label guide plates.
Place
2
2
1
LABEL
SUPPLY
MODULE
LABEL GUIDE PLATE
Set of 2
RELEASE CATCH
Release catch for opening the label supply hub
12
LABEL GUIDE PLATE
Set of 2
LABEL SUPPLY HUB
Set of 2
LABEL GUIDE
Set of 2
RELEASE CATCH
Release catch for opening
the label supply hub
Close the plates