Godex EZ-2200 Programmer's Manual page 10

5. Line command
Syntax : La,x, y, x1, y1
Parameter : a = o, overwrite line
a = e, exclusive or line
x : left-up; per horizontal(Hori.) pos. (dot; 1mm=
8dots)
y : left-upper vertical (Vert.) pos. (dots)
x1: right-bottom Hori. Pos. (dots)
y1: right-bottom Vert. Pos. (dots)
Description : Define a line to render in the label (refer page 16)
** The diagonal line draw is not available **
6. Rectangle
Syntax : Rx, y, x1,y1, lrw, ubw
Parameter : x : left-upper Hori .pos. (dots)
y : left-upper Vert. Pos. (dots)
x1 : right-bottom Hori. Pos. (dots)
y1 : right-bottom Vert. Pos. (dots)
lrw : thickness of left, right border (dots)
ubw : thickness of upper bottom border
(dots)
Description : Draw a rectangle in the label (refer page 16)
7. Table
Syntax : Hx,y,row_count,col_count,row_width,col_width,line_width
Parameter : x : left-upper Hori .pos. (dots)
y : left-upper Vert. Pos. (dots)
row_count : numbe of rows
col_count : number of columns
row_width : row width
col_width : column width
line_width : line width
Description : Draw a table in the label.
Example : H20,20,2,3,30,20,10
8. Define time layout formatting
Syntax : Th|m|s
Parameter : h = Hour format ( 2 digits, 00 ~ 23)
m = Minute format ( 2 digits, 00 ~ 59)
s = Second format (2 digits, 00 ~ 59)
| = Separator (It can be any separator between dec. 32 to 63 of ASCII).
Descripton : Define the time layout for internal real-time clock (refer page 15)
9. Graphics
Syntax : Yx, y, name
Parameter : x : Hori. Pos. of left-upper of graphics (dots)
y : Vert. Pos. of left-upper of graphics (dots)
name : Name of graphics download
Description : This command is print a graphic that has been previously stored in printer memory (refer page
19)
Example:
A graphic in printer named "Graphic1",
command Y20,40,Graphic1
this graphic into label at position
(20,40).
(x,y)
ubw
x
y (20,40)
will put
9
lrm
(x1,y1)