Godex EZ-2200 Programmer's Manual page 9

Label formatting commands
1. Define date layout
Syntax : Daa|bb|cc
Parameter : aa = Year
y2 : Year with two digits (such as 97)
y4 : Year with four digits ( such as 1997)
bb = Month
me : Month in letters (JAN, FEB, .... )
mn : Month in numeric (01, 02, .... )
cc = 2 digits day
| = Separator, can be any ASCII character between decimal 32 to 63.
Description : Define the date layout for print out (refer page 15)
2. Serial number setting
Syntax : Cx,ys, value,prompt
Parameter : x: 0 to 9(up to10group), maximum combination up to 3 groups.
y: select the decimal
y = none, Decimal (0~9)
y = A, Hexadecimal (0~9,A~F)
y = C, 0~9, A~Z
s: start value of serial variable (up to 13-digit)
value: inc. / dec. value of serial variable (up to 12-digit)
prompt: prompt of serial variable (up to 20 characters)
Description : Set the serial number (refer page 18)
Example : ^Q50,0,0
^W100
^S6
^H10
^E12
^P5
^L
C0,000,+1,AA
C1,AEE,+1,BB
C2,CZYY,+1,CC
AC,5,5,1,1,1,0,^C0^C1^C2
E
3. Terminate label formatting mode and print label
Syntax : E
Parameter : None
Description : End of formatting command; printer will print label after receiving this command.
4. Graphic command
Syntax : Gwxxx
Parameter : wxxx...
w : byte number of image data (xxx...)
Description : This command is a sub-command of ~G It is sent by binary data. W is the digits number byte of
image data (refer page 18). For example, if the image file is 50 bytes, the command is G2xxx . (2:
ASCII is 50 decimal)
Printing result:
000EEZYY
001EFZYZ
002F0ZZ0
003F1ZZ1
004F2ZZ2
8