Maintenance; Tools And Methods - AMT Datasouth Fastmark M7XPd User Manual

Maintenance

Tools and Methods

Printer
1. Always turn off the printer before
2. Allow the print head to cool for a
3. Use a (Head cleaner pen) or cotton
Print
Head
1. Turn the power off.
Platen
2. Rotate the platen roller and wipe it
Roller
thoroughly with 99% alcohol and a
cotton swab, or lint-free cloth.
Tear Bar Use the lint-free cloth with 99%
/Peel Bar alcohol to wipe it.
Compressed air or vacuum
Sensor
Wipe it with water-dampened cloth
Exterior
Interior Brush or vacuum
Note:
⚫
Do not touch print head by hand. If you touch it accidentally, please use alcohol to
clean it.
⚫
Please use 99% alcohol. DO NOT use medical alcohol, which may damage the
printer head.
⚫
Regularly clean the print head and supply sensors when changing a new ribbon to
keep printer performance and extend printer life
Method
cleaning the print head.
minimum of one minute.
swab and 99% isopropyl Alcohol to
clean the print head surface.
Clean the print head when changing
a new label roll
Clean the platen roller when
Changing a new label roll
As needed
Monthly
As needed
As needed
- 59 -
Interval