AMT Datasouth Fastmark M7XPd User Manual page 38

Sensor
This option is used to calibrate the selected sensor. We recommend senor
calibration when changing media and before printing.
Item
Auto
Calibration
Manual
setup
Threshold
Detect
Maximum
Length
Advanced
Description
This option is used to set the media sensor type and
calibrate the selected sensor automatically. Printer will
feed 2 to 3 gap labels to calibrate the sensor sensitivity
automatically.
In case "Automatic" does not apply to the media type,
use "Manual" function to set the paper length and gap/b
line size. Then scan the backing/mark to calibrate the
sensor sensitivity.
This option is used to set sensor sensitivity in fixed or
auto mode.
This option is used to set the maximum length for label
calibration.
This function can set the minimum paper length and
maximum gap/b line length for "auto-calibrate" sensor
sensitivity.
- 38 -
Default
N/A
N/A
Auto
9.9
inch
N/A