AMT Datasouth Fastmark M7XPd User Manual page 33

TSPL2
Item
Speed
Density
Direction
Description
Use this item to setup print speed. Each increase or decrease
is 1 inch per second. Available setting is from 4 to 12.
Use this option to setup printing darkness. The available
setting is from 0 to 15, and the step is 1. You may need to
adjust your density based on selected media.
The direction setting value is either 1 or 0. Use this item to
setup the printout direction.
DIRECTION 0 DIRECTION 1
- 33 -
Default
6
8
0